MENU AM/ENAM/EN Search NSK - Motion & Control
Drive Technology Drive technology encompasses a wide range of applications – from low technical requirements to complex systems which demand maximum reliability in service, such as wind turbine gears. Operating conditions vary too. For example, conveyor belts are usually subject to constant load, while other machinery such as those foudn in cement mills have to cope with widely fluctuating loads.

NSK can offer the ideal solution to meet any of these challenges. Tailored precisely to the technical requirements of your application. As well as providing solutions for specific industries, bearings from NSK are made from quality materials, offering outstanding precision with long service life.
  • Industrial Gears
  • Electric Motors and Generators
  • Products

Industrial Gears


Industrial Gears

Operating conditions: high shock loads

Industrial gears are used in many different industries and often face dynamic operating conditions coupled with high shock loads in some cases. They are usually located between the drive on one side and the process technology on the other. In this case, industrial gears primarily serve to reduce input speeds and increase torques for the processes in question. Typical applications include power generation and mining.

All industrial gears must be reliable in spite of the dynamic processes acting on them. As higher-performance machines keep emerging, the bearings used for shafts also play a crucial role in ensuring service reliability and are tailored specifically to the relevant application.

For instance, NSK supplies solutions for every stage of the planetary gears used for wind turbines, from the planetary carrier to the generator shaft. Various options are available: traditional locating/non-locating bearings, floating bearings and adjusted bearing arrangements. Material  selection is another key consideration. NSK’s Super-TF technology maximizes bearings’ service life, even in operating conditions where conventional bearings would show signs of fatigue damage. 

Total Quality Solution
High Load Capacity Cylindrical Roller Bearings
Two key innovations extend the lives of heavy-duty cylindrical roller bearings by up to 30%. First, an increase in the number of rollers reduces the surface pressure on the contact area between the rollers and the raceway, thereby increasing the maximum load. Second, an optimized cage provides sufficient stability despite the larger number of rolling elements.

Our innovations: 
The TF series of bearings 
Electrically insulated bearings with a ceramic coating
NSKHPS Spherical Roller Bearings

Siemens MultiDrive

Electric Motors and Generators

 

Electric Motors and Generators

Operating conditions: constant torques plus changing speeds

Electric motors and generator bearings have different demands compared to gears. Knocks and fluctuating torques rarely occur. Different speeds are typically the key consideration when it comes to selecting bearings.

Performance classes vary, however, electric motors and generators in the consumer segment – such as drive motors for washing machines or car alternators – usually have to fit in a very small space and operate under constant conditions. Motors and generators with a higher power density are normally used in industrial plants or to produce power, where considerable load variations are common place.

In electric motors and generators, the shaft bearing often has to be insulated from the housing to prevent damage caused by current conduction. With this in mind,  NSK has developed electrically insulated bearings with a ceramic coating suitable for the conditions associated with these specific mechatronic applications.
NSK can supply the right bearings for all operating conditions and applications including extremely compact deep-groove ball bearings which deliver ultra-quiet running as well as optimized low energy consumption with little maintenance.

Total Quality Solution
Electrically insulated bearings with a ceramic coating
Some applications are prone to causing bearing damage and premature failure due to electrical corrosion. Electrical corrosion is caused by electrical discharges throught the rolling elements and the raceway. NSK offers a insulated bearings to deal with this problem. 

Our innovations: 
The HR series of deep-groove ball bearings  
Hybrid bearings with ceramic balls

Electric Motors & Generators

Products

NSKHPS Series Roller Bearings

Advanced material technology offering higher speeds and higher load ratings.  >>

High Load Capacity Cylindrical Roller Bearing

Developed for gearboxes in large industrial machinery. >>

High Capacity - HR Series

Increased dynamic load rating with larger rolling elements to help improve machinery life performance.  >>
 

Ceramic-Coated Ball Bearings

Optimal for applications that are susceptible to bearing damage and failures due to electrical corrosion  >>

Hybrid Bearings with Ceramic Balls

>>
  • NSK Success Stories

    NSK Success Stories

    Successes are best when shared. To see NSK solutions by industry click here. >>

  • Contact Us

    Contact Us

    Send Us a Message >>

  • AIP - Asset Improvement Program

    AIP - Asset Improvement Program

    AIP is a comprehensive program to help customers reduce cost and increase uptime. >>

  • Troubleshooting

    Troubleshooting

    Bearing and linear components troubleshooting tools >>

  • Technical Tools

    Technical Tools

    To support you, NSK has developed the following technical tools >>

Cookies on the NSK website

We use cookies to ensure that we give you the best experience on our websites and web applications. By continuing without changing your browser settings, we assume you give your consent to receive cookies. However, you can change your browser cookie setting at any time.