Single row deep groove ball bearings are the most common type of rolling bearing and are used in a wide variety of applications.
The inner groove of magneto bearings is a little shallower than that of deep groove bearings. Since the outer ring has a shoulder on only one side, the outer ring may be removed. This is often advantageous for mounting.
NSK offers a full range of metric and inch size miniature ball bearings with bore diameters of less than 10mm.
Ball bearings are used in automotive applications such as motors, compressors, and alternators.
Designed for outstanding toughness under harsh conditions, combining longer service life & superior resistance against wear, seizure & heat.
Tensioned O-rings mounted in the bearing outer ring improve creep prevention under rotating loads. The product offers easy assemble and the possibility of reusable housings.
Sealed for life, maintenance free, these high performance ball bearings have superior resistance to magnetic flux.
Fretting resistant & long-life servomotor bearings are utilised where precise motion control is vitally important.
Long life, low torque ball bearings - EA3 grease is pre-filled in shielded/sealed ball bearings used in a wide range of electric motors to maximise life and protection, but minimise noise and power loss.
LGU and LG2 greases achieve lower particle emissions and longer service life in comparison to conventional fluorine greases.